Buy British Larch/Douglas Fir Pyramid Bollard - 175mm and 225mm Sections Online
.jpg)
British Larch/Douglas Fir Pyramid Bollard - 175mm and 225mm Sections
£40.49 ex VAT
£48.59 inc VAT
- Douglas fir: hard-wearing, high-resin softwood that needs no treatment
- Pyramid Top
- 175 x 175 mm and 225 x 225 mm square sections, 7 lengths from 900 to 3000 mm
- Rough sawn, planed all round to a smooth finish, or planed with a chamfer
- Optional single or double 20 mm grooves, plain or with reflective tape
- For demarcation, protecting verges and guiding traffic and pedestrians
Select a length and then complete the required options to configure your British Larch/Douglas Fir Pyramid Bollard - 175mm and 225mm Sections
Our Pyramid British Larch/Douglas Fir Bollard is a square Douglas fir bollard with a pyramid top, in 175 x 175 mm and 225 x 225 mm sections, for marking out areas, protecting grass verges from vehicles or providing a barrier for buildings.
Uses
Timber bollards are a cost-effective alternative to steel or concrete for pedestrian and traffic management: guiding vehicles in a car park, protecting pedestrian areas, protecting grass verges from vehicles or forming a barrier around buildings.
About Douglas fir
Douglas fir is a durable domestic softwood. It is not quite as durable as European oak, but it is a lower-cost and equally attractive alternative. Its high resin content and naturally tight grain make it one of the most hard-wearing domestic softwoods, so it does not need to be treated. Its colour ranges from cream to pink to deep red and weathers to a silvery grey over time.
Finishes and options
- Top style: Pyramid (fixed on this listing). The other top styles are listed separately.
- Finish: Rough Sawn, Planed All Round (planed all round to a smooth finish), or Planed and Chamfered (planed all round with a chamfer on the edges). Planed bollards finish approximately 6 mm smaller than the nominal size (±2 mm).
- Grooves: none, a single groove or double grooves, plain or with reflective tape (white as standard; for red, add a comment to your order).
- Groove size: each groove is 20 mm wide and shallow, with the reflective tape set just below the surface (about 7 mm deep). The first groove is centred 90 mm below the top of the shaft; on double grooves the second is centred 50 mm below the first.
Sizes and pricing
Available in 175 x 175 mm and 225 x 225 mm sections and 7 lengths from 900 to 3000 mm. Choose the size and length from the drop-down; the finish and grooves are added as options, and the price updates as you choose.
Specifications
| Species | Douglas fir |
|---|---|
| Treatment | None needed |
| Top style | Pyramid |
| Sections | 175 x 175 mm and 225 x 225 mm (nominal) |
| Lengths | 900, 1000, 1200, 1500, 1800, 2400, 3000 mm |
| Finish | Rough Sawn; Planed All Round (smooth finish); Planed and Chamfered |
| Grooves | None, single or double; 20 mm wide, shallow (about 7 mm deep); first centred 90 mm below the top, second 50 mm below the first; plain or with reflective tape |
| Priced per | Bollard, ex VAT |
Fixing and installation
As a guide, a 1000 mm bollard installed in the ground sits about 700 mm above ground, with about 300 mm buried.
Good to know
- Natural timber varies: expect some differences in colour and grain from bollard to bollard and from the photos.
- Sizes are nominal and can vary slightly with moisture content.
- Prefer oak? See our Oak Bollards.
Custom Cut Timber
Our products offer you inventive and cost-effective ways of customising your garden to give it a truly unique touch
